0%

ABS Plastic Pipes Dimensions Chart - Imperial Sizes

ABS (Acrylonitrile Butadiene Styrene), a product renowned for its excellent impact strength, wide operating temperature range from (minus) -40ºc to (plus) +70ºc and its electrical resistance.

Due to these robust qualities it is commonly found in industrial applications requiring an energy-efficient solution in the low-temperature ranges such as refrigeration and cooling systems, chilled water, transportation of foodstuffs and slurries etc., and is available in a range of Imperial sizes.

ABS valves and fittings are resistant to a majority of acids and aggressive agents, to mineral oils and fatty substances, in addition to water and watery saline solutions.

Please see the below Chart of all Imperial ABS Pipe sizes from ¼” to 10” NB and 8mm to 280mm OD.

 
ABS Pipe Sizes
  • OD: Outer Dimension
  • W: Wall
  • ID: Inner Dimension
  •  
  • The illustration provided is for explanatory purposes only.
 

ABS Class C Pipe

SIZE SKU OD WALL ID
1” 011.P.04CPE 33.6 2 29.6
1 1/4” 011.P.05CPE 42.2 2.5 37.2
1 1/2” 011.P.06CPE 48.3 2.8 42.7
2” 011.P.07CPE 60.3 3.6 53.1
2 1/2” 011.P.08CPE 75.2 5 65.2
3” 011.P.09CPE 88.9 5.2 78.5
4” 011.P.10CPE 114.3 6.6 101.1
5” 011.P.11CPE 140.2 9.3 121.6
6” 011.P.12CPE 168.3 9.9 148.5
8” 011.P.13CPE 219.1 12.7 193.7
 

ABS Class E Pipe

SIZE SKU OD WALL ID
1/2” 011.P.02EPE 21.4 2 17.4
3/4” 011.P.03EPE 26.7 2.5 21.7
1” 011.P.04EPE 33.6 3.1 27.4
1 1/4” 011.P.05EPE 42.2 3.9 34.4
1 1/2” 011.P.06EPE 48.3 4.5 39.3
2” 011.P.07EPE 60.3 5.6 49.1
3” 011.P.09EPE 88.9 8.3 72.3
4” 011.P.10EPE 114.3 10.6 93.1
 

ABS Class T Pipe

SIZE SKU OD WALL ID
1/2” 011.P.02TPE 21.4 3.6 14.2
3/4” 011.P.03TPE 26.7 3.6 19.5
1” 011.P.04TPE 33.6 4.3 25
1 1/4” 011.P.05TPE 42.2 5.3 31.6
1 1/2” 011.P.06TPE 48.3 6 36.3
2” 011.P.07TPE 60.3 7.2 45.9
 

ABS Pipe Support Centres

In above ground installations it is essential to provide support to ensure that the weight of the pipe and its contents are adequately supported. The following recommended maximum spacings are for ABS pipes operating under the following conditions:

  1. Fluid density of not more than 1g/cm3
  2. PN15 pipe
  3. Horizontal pipe runs

For vertical pipe runs, spacing should be increased by 50%.

 
Nominal Bore 20ºC 50ºC 70ºC
Imperial Spacing given in Metres
3/8" 0.8 0.5 0.4
1/2" 0.9 0.6 0.5
3/4" 1.0 0.7 0.6
1" 1.1 0.8 0.7
1 1/4" 1.2 0.9 0.7
1 1/2" 1.3 1.0 0.7
2" 1.4 1.1 0.8
2 1/2" 1.5 1.2 0.8
3" 1.6 1.2 0.9
4" 1.8 1.3 1.0
5" 2.0 1.5 1.1
6" 2.1 1.6 1.2
8" 2.3 1.8 1.5